Radium Engineering Fuel Level Sender, 0-90 ohm, 11.7in, Shrouded

Radium Fuel Level Sender, 0-90 ohm, 11.7in, Shrouded

Application: Radium FCST (20-099X-XX) and FCST-X (20-199X-XX) fuel cell surge tanks – SAE 5-bolt sender port
Part Type: Shrouded fuel level sender, 0-90 ohm, 11.7in
Part Number: 20-0847-297

Radium Engineering fuel level senders are built to the standard SAE 5-bolt pattern for use with Radium fuel cell surge tanks. The sealed 304 stainless steel probe uses a magnetic float and reads 0 ohm empty to 90 ohm full – a range common with aftermarket gauges.

The 11.7in (297mm) shrouded sender is used in Radium's 14 and 22 gallon RA-Series fuel cells, and is supplied with an FKM gasket, stainless hardware and a Deutsch DT 2-pin connector.

Key Features

• SAE 5-Bolt Flange: Standard sender mounting pattern
• 0-90 Ohm Output: 0 ohm empty, 90 ohm full
• Shrouded Probe: Sealed 304 stainless steel probe with magnetic float
• Length: 11.7in (297mm)
• Deutsch DT Connector: 2-pin connector and sockets included
• Fuel Compatibility: Suits petrol, ethanol and methanol

What's Included

• Sensing probe
• SAE 5-bolt gasket
• 5x Stainless steel 10-32 bolts
• Deutsch DT 2-pin connector
• 2x Deutsch DT sockets

Important Notes

• Used in Radium 14 and 22 gallon RA-Series fuel cells
• Shrouded senders (20-0847-XXX) fit only the newer FCST (20-099X-XX) and FCST-X (20-199X-XX) – the 40mm shroud requires a thru-hole of at least that size
• Older FCST tanks (20-049X-XX and 20-069X-XX) require the non-shrouded 20-0747-XXX sender
• Reads 0 ohm (empty) to 90 ohm (full) – a 0-90 ohm fuel level gauge is required. Radium does not sell gauges
• If your OEM gauge is not compatible, a resistance signal converter (e.g. Classic Instruments SN34) may be used – Radium has no experience with these converters
• Senders purchased with an FCST or FCST-X come pre-installed
• To test, measure the resistance across the two wires while tipping the sender so the float moves
• Installation instructions are available in the Instructions tab

Vehicle Fitment

• Radium FCST fuel cell surge tanks 20-099X-XX
• Radium FCST-X fuel cell surge tanks 20-199X-XX
• Radium 14 and 22 gallon RA-Series fuel cells

If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.

Installation

We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.

Note

Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.