Radium Engineering Catch Can Petcock Drain Kit

Radium Catch Can Petcock Drain Kit

Application: Radium catch cans and any can or reservoir with a 4AN ORB drain port
Part Type: Catch can remote drain kit
Part Number: 20-0024

The Radium Catch Can Petcock Drain Kit adds a ball valve to the bottom port of your catch can, allowing any Radium catch can to be drained remotely without unscrewing the canister body.

The 4AN ORB barbed fitting installs in the bottom of the catch can in place of the original 4AN plug. The hose is cut to length to place the valve where you want it, and again after the valve to suit your preferred draining point under the car.

Key Features

• Remote Draining: Empty the catch can without removing the canister body
• Direct Fitment: 4AN ORB barbed fitting replaces the original 4AN drain plug
• Rated Ball Valve: 1/4" barbs, rated to 862 kPa (125psi) at 60°C (140°F)
• Flexible Routing: Hose is cut to length for the desired valve location and drain point

What's Included

• Anodised 4AN ORB barbed adapter fitting, black
• Ball valve with 1/4" barbs, rated 862 kPa (125psi) at 60°C (140°F)
• 1.2m (4ft) Radium 1/4" PCV hose
• Spring clamps

Important Notes

• Vehicle-specific catch can kits must be checked for space to install and route the hose and valve – many kits will not have room for the drain kit
• Secure both hoses at the valve with the included spring clamps – no hose clamp is needed at the catch can barb

Vehicle Fitment

• All Radium Fluid Lock and standard (non-Fluid Lock) catch cans
• Radium VTE Competition Catch Cans
• Radium VTA Competition Catch Cans
• Any can or reservoir with a 4AN ORB drain port

If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.

Installation

We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.

Note

Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.