Radium Engineering 10AN Male Swivel Banjo 18.0mm Press Fit Fitting for Toyota 1JZ/2JZ Intake

Radium 10AN Male Swivel Banjo 18.0mm Press Fit Fitting - Toyota 1JZ/2JZ Intake

Application: Toyota 1JZ / 2JZ valve cover – intake-side PCV port
Part Type: 10AN male press-in valve cover fitting
Part Number: 20-0408

The Radium Press-In Valve Cover Fitting converts the OEM PCV valve port on the intake side of Toyota JZ valve covers from its original barb fitting to a 10AN male swivel connection. This allows large breather lines to be run to a competition catch can.

The fitting simply presses into the valve cover with no drilling or welding. Construction is stainless steel and aluminium, anodised and laser engraved, with FKM O-rings providing the swivel seal.

Key Features

• 10AN Male Swivel: Low-profile 10AN male fitting with swivel action
• Press-Fit Install: No drilling or welding required
• Low Profile: 1.19" installed height
• Construction: Stainless steel and aluminium
• FKM Seals: Swivel sealed with FKM O-rings
• Finish: Anodised and laser engraved

Important Notes

• Replaces the intake-side PCV valve – a new PCV valve must be installed inline or on the catch can to retain the intake manifold connection
• If the PCV valve is held by OEM grommet 90480-18001, the grommet must be removed
• For 2JZ-GE VVT-i engines, fitment is confirmed for 2000 – May 2002 only
• Engines not listed have not been confirmed for fitment

Vehicle Fitment

• Toyota 1JZ-GE VVT-i
• Toyota 1JZ-GTE VVT-i and non-VVT-i
• Toyota 2JZ-GTE VVT-i and non-VVT-i
• Toyota 2JZ-GE non-VVT-i
• Toyota 2JZ-GE VVT-i (2000 – May 2002 only)
• Radium also lists many other Toyota/Lexus models using the OEM 90480-18001 PCV grommet – contact us to confirm

If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.

Installation

We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.

Note

Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.