Öhlins Road & Track Coilovers for Toyota GR Yaris XPA16R Gen 1 (Pre-Facelift)
Tax included. Shipping calculated at checkout
Description
Öhlins Road & Track Coilovers – Toyota GR Yaris XPA16R Gen 1 (Pre-Facelift)
Part Number: TOS MW00S1 | Chassis: XPA16R | Fitment: Toyota GR Yaris Gen 1 (Pre-Facelift) 2020+
⚠️ Fits Gen 1 Pre-Facelift Toyota GR Yaris (XPA16R) only. Not compatible with the facelift model.
Over 40 years of motorsport engineering distilled into a street-ready coilover kit. The Öhlins Road & Track series delivers a genuine racing experience without sacrificing daily drivability — thanks to Öhlins' proprietary Dual Flow Valve (DFV) technology. Featuring a McPherson upside-down front strut and conventional rear shock, with a wide -5 to -30mm lowering range and 80 N/mm spring rates front and rear. Complete suspension kit with springs and accessories included.
Technical Specifications
| Part Number | TOS MW00S1 |
| Technology | DFV — Dual Flow Valve |
| Front Damper Type | McPherson strut — upside-down |
| Rear Damper Type | Conventional shock absorber |
| Damping Adjustment | Single bleed adjuster (front & rear) |
| Front Spring Rate | 80 N/mm — included |
| Rear Spring Rate | 80 N/mm — included |
| Lowering Range | Approx. −5mm to −30mm below standard (front & rear) |
| Top Mounts | Use with original top mounts (front & rear) |
| Springs Included | Yes — complete kit with springs & accessories |
| Rebuildable | Yes |
| Corrosion Testing | ISO 9227 salt spray tested |
| Warranty | 2-year limited warranty |
General Features
- DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
- Individual height adjustment — −5mm to −30mm range
- Single bleed adjuster — compression and rebound
- Rebuildable for custom tuning
- Corrosion salt spray tested (ISO 9227)
- 2-year limited warranty
- Complete kit with springs and accessories included
Front Features
- McPherson strut — upside-down design
- Single bleed adjuster
- Spring preload adjuster
- Height adjustable — approx. −5mm to −30mm below standard
- Coil springs included (80 N/mm)
- Use with original top mounts
Rear Features
- Conventional shock absorber
- Single bleed adjuster
- Separate spring preload adjuster
- Height adjustable — approx. −5mm to −30mm below standard
- Coil springs included (80 N/mm)
- Use with original top mounts
Kit Contents
- Complete coilover kit including springs and all mounting parts
- C-spanner for spring preload adjustment
- Owner's manual and mounting instructions
- Öhlins sticker set
What is DFV (Dual Flow Valve)?
DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.
Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control. Traction is always maintained at its optimum level.
Why Öhlins Road & Track?
- ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
- ✅ DFV technology — genuine race-car response with OEM-level daily comfort
- ✅ Upside-down McPherson front strut — reduced unsprung mass, sharper response
- ✅ Wide −5 to −30mm lowering range — street and track flexibility
- ✅ Rebuildable, ISO 9227 corrosion-tested, 2-year limited warranty
Vehicle Fitment
| Toyota GR Yaris | XPA16R — Gen 1 Pre-Facelift — 2020+ |
If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.
Installation
We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.
Note
Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.