Öhlins Road & Track Coilovers for Toyota GR Corolla 2023+
Tax included. Shipping calculated at checkout
Description
Öhlins Road & Track Coilovers – Toyota GR Corolla (2023+)
Part Number: TOS MX00S1 | Fitment: Toyota GR Corolla 2023+
Engineered specifically for the Toyota GR Corolla, the Öhlins Road & Track kit brings legendary suspension expertise to one of the most exciting hot hatches on the market. Built on Öhlins' proprietary Dual Flow Valve (DFV) technology with a 1-way 25-click compression and rebound adjuster, this kit lets you effortlessly fine-tune your GR Corolla's suspension to match your driving style — from daily commuting to full track attack.
The kit is supplied as a complete car set from the factory with springs included. No cancellation kit is required, and the kit uses OE top mounts for a clean, direct fitment.
Technical Specifications
| Part Number | TOS MX00S1 |
| Technology | DFV — Dual Flow Valve |
| Damping Adjustment | 1-way — 25-click compression & rebound adjuster |
| Front Damper Type | McPherson strut — monotube upside-down |
| Rear Damper Type | Aluminium monotube shock absorber |
| Front Spring Rate | 90 N/mm (Part No. 49180-27) — included |
| Rear Spring Rate | 90 N/mm (Part No. 47020-27) — included |
| Recommended Lowering | Approx. 25mm below standard (front & rear) |
| Top Mounts | Use with original OE top mounts |
| Cancellation Kit | Not required |
| Springs Included | Yes — complete car set supplied from factory |
| Rebuildable | Yes — rebuildable for custom tuning |
| Corrosion Testing | ISO 9227 salt spray tested |
| Warranty | 2-year limited warranty |
Included Springs
| Position | Part No | Spring Rate |
|---|---|---|
| Front | 49180-27 | 90 N/mm |
| Rear | 47020-27 | 90 N/mm |
General Features
- DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
- 1-way 25-click compression and rebound adjuster
- Individual height adjustment
- Rebuildable dampers for custom tuning
- Corrosion salt spray tested (ISO 9227)
- 2-year warranty
- Front & rear springs included — complete car set
Front Features
- McPherson strut — monotube upside-down technology
- Spring preload adjuster
- Height adjustable — 25mm lower than standard is our recommended ride height
- Spring rate 90 N/mm — included
- Use with original top mounts
Rear Features
- Aluminium monotube shock absorber
- Spring preload adjuster
- Separate damper length adjuster
- Height adjustable — 25mm lower than standard is our recommended ride height
- Spring rate 90 N/mm — included
- Use with original top mounts
What is DFV (Dual Flow Valve)?
DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.
Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control.
Why Öhlins Road & Track?
- ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
- ✅ DFV technology — genuine race-car response with OEM-level daily comfort
- ✅ Monotube upside-down front strut — reduced unsprung mass, sharper response
- ✅ Complete car set supplied from factory — springs included, no cancellation kit required
- ✅ Rebuildable, ISO 9227 corrosion-tested, 2-year warranty
Vehicle Fitment
| Toyota GR Corolla | 2023 to present |
If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.
Installation
We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.
Note
Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.