Öhlins Road & Track Coilovers for Subaru WRX VA 2015-2021 / STI GR/GV/VA 2008-2021
Tax included. Shipping calculated at checkout
Description
Öhlins Road & Track Coilovers – Subaru WRX VA (2015–2021) / STI GR/GV/VA (2008–2021)
Part Number: SUS MI10S1 | Fitment: Subaru WRX VA 2015–2021 & Subaru STI GR, GV, VA 2008–2021
Over 40 years of motorsport engineering distilled into a street-ready coilover kit. The Öhlins Road & Track series delivers a genuine racing experience without sacrificing daily drivability — thanks to Öhlins' proprietary Dual Flow Valve (DFV) technology. Featuring a McPherson front strut with camber-adjustable top mounts included, and a conventional rear shock, with springs included as a complete car set.
Technical Specifications
| Part Number | SUS MI10S1 |
| Technology | DFV — Dual Flow Valve |
| Front Damper Type | McPherson strut |
| Rear Damper Type | Conventional shock absorber |
| Damping Adjustment | Single bleed adjuster (front & rear) |
| Front Spring Rate | 90 N/mm — included |
| Rear Spring Rate | 70 N/mm — included |
| Lowering Range | Approx. 20mm below standard (front & rear) |
| Front Top Mounts | Camber-adjustable top mounts — included |
| Rear Top Mounts | Top mounts — included |
| Springs Included | Yes — front & rear springs included |
| Rebuildable | Yes |
| Corrosion Testing | ISO 9227 salt spray tested |
| Warranty | 2-year limited warranty |
Included Springs
| Position | Spring Rate |
|---|---|
| Front | 90 N/mm |
| Rear | 70 N/mm |
General Features
- DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
- Individual height adjustment
- Single bleed adjuster — compression and rebound
- Rebuildable for custom tuning
- Corrosion salt spray tested (ISO 9227)
- 2-year limited warranty
- Front & rear springs included
Front Features
- McPherson strut
- Single bleed adjuster
- Spring preload adjuster
- Height adjustable — approx. 20mm lower than standard
- Coil springs included (90 N/mm)
- Camber-adjustable top mounts included
Rear Features
- Conventional shock absorber
- Single bleed adjuster
- Height adjustable — approx. 20mm lower than standard
- Coil springs included (70 N/mm)
- Top mounts included
What is DFV (Dual Flow Valve)?
DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.
Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control. Traction is always maintained at its optimum level.
Öhlins also incorporates a unique needle bleed valve that expands with temperature, compensating for changes in fluid viscosity as the damper heats up. The result: consistent damping performance lap after lap, regardless of operating temperature.
Why Öhlins Road & Track?
- ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
- ✅ DFV technology — genuine race-car response with OEM-level daily comfort
- ✅ Camber-adjustable front top mounts included — dial in your alignment for street or track
- ✅ Covers WRX VA & STI GR/GV/VA — one kit for 14 years of the platform
- ✅ Rebuildable, ISO 9227 corrosion-tested, 2-year limited warranty
Vehicle Fitment
| Subaru WRX | VA — 2015–2021 |
| Subaru WRX STI | GR — 2008–2010 |
| Subaru WRX STI | GV — 2011–2014 |
| Subaru WRX STI | VA — 2015–2021 |
If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.
Installation
We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.
Note
Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.