Öhlins Road & Track Coilovers for Audi A3/S3/RS3 8V-8Y / TT/TTS/TTRS 8S / VW Golf R Mk7/Mk8 (AWD)
Tax included. Shipping calculated at checkout
Description
Öhlins Road & Track Coilovers – Audi A3/S3/RS3 / TT/TTS/TTRS / VW Golf R (AWD)
Part Number: VWS MU21S2 | Drivetrain: AWD / Quattro / 4Motion models only
Over 40 years of motorsport engineering distilled into a street-ready coilover kit. The Öhlins Road & Track series delivers a genuine racing experience without sacrificing daily drivability — thanks to Öhlins' proprietary Dual Flow Valve (DFV) technology. This AWD-specific kit (VWS MU21S2) features a higher rear spring rate than the FWD variant, tuned for the additional weight and traction demands of all-wheel drive platforms. Springs included. Weight reduction of approx. 10kg compared to original suspension.
⚠️ AWD / Quattro / 4Motion models only. For FWD models, see VWS MU21S1.
⚠️ Note: For vehicles equipped OE with DDC (Dynamic Damper Control) electronic suspension, an Öhlins cancellation kit is also required (sold separately). See cancellation kit table below.
Technical Specifications — VWS MU21S2 (AWD)
| Part Number | VWS MU21S2 |
| Technology | DFV — Dual Flow Valve |
| Front Damper Type | McPherson strut (55mm width) |
| Rear Damper Type | Conventional shock absorber |
| Damping Adjustment | Single bleed adjuster (front & rear) |
| Front Spring Rate | 70 N/mm — included |
| Rear Spring Rate | 80 N/mm — included (higher than FWD variant) |
| Lowering Range | Approx. 15mm below standard (front & rear) |
| Top Mounts | Use with original top mounts (front & rear) |
| Springs Included | Yes — front & rear springs included |
| Weight Saving | Approx. −10kg vs original suspension |
| Rebuildable | Yes |
| Corrosion Testing | ISO 9227 salt spray tested |
| Warranty | 2-year limited warranty |
FWD vs AWD Variant Comparison
| Part No | Recommended For | Front Spring | Rear Spring |
|---|---|---|---|
| VWS MU21S1 | FWD models | 70 N/mm | 70 N/mm |
| VWS MU21S2 | AWD / Estate models (this kit) | 70 N/mm | 80 N/mm |
Cancellation Kit (if required)
For vehicles equipped OE with DDC (Dynamic Damper Control) electronic suspension, an Öhlins cancellation kit must also be used. Ordered separately.
| Part No | Description |
|---|---|
| 35020-15 | Cancellation kit DDC |
General Features
- DFV technology (Dual Flow Valve) — Öhlins' proprietary damping system
- Individual height adjustment
- Single bleed adjuster — compression and rebound
- Approx. −10kg weight saving vs original suspension
- Rebuildable for custom tuning
- Corrosion salt spray tested (ISO 9227)
- 2-year limited warranty
- Front & rear springs included
Front Features
- McPherson strut — 55mm width
- Single bleed adjuster
- Spring preload adjuster
- Height adjustable — approx. 15mm lower than standard
- Coil springs included (70 N/mm)
- Use with original top mounts
Rear Features
- Conventional shock absorber
- Single bleed adjuster
- Height adjustable — approx. 15mm lower than standard
- Coil springs included (80 N/mm)
- Use with original top mounts
What is DFV (Dual Flow Valve)?
DFV is Öhlins' proprietary damping technology that sets the Road & Track range apart from conventional coilovers. The dual flow valve provides consistent damping characteristics on both compression and rebound strokes — the damper fluid follows a consistent flow path in both directions. This means the wheel and tyre can rapidly return to the road surface after a bump, maximising grip and traction at all times.
Because DFV opens more quickly on minor road imperfections, ride comfort is surprisingly supple — more akin to an OEM strut than a typical coilover. Over undulating surfaces, the compliance of the R&T units allows the car to crest bumps and potholes while remaining stable and in control. Traction is always maintained at its optimum level.
Why Öhlins Road & Track?
- ✅ Over 40 years of motorsport engineering heritage — trusted by factory race teams worldwide
- ✅ DFV technology — genuine race-car response with OEM-level daily comfort
- ✅ AWD-tuned rear spring rate (80 N/mm) — optimised for Quattro / 4Motion platforms
- ✅ Approx. 10kg lighter than OEM suspension — improved handling response
- ✅ Rebuildable, ISO 9227 corrosion-tested, 2-year limited warranty
Vehicle Fitment — AWD Models (55mm Front McPherson Strut)
| Brand | Model | Chassis | Note |
|---|---|---|---|
| Volkswagen | Golf R Mk7 | Mk7 | AWD Hatch only — 55mm front strut |
| Volkswagen | Golf R Mk7.5 | Mk7.5 | AWD Hatch only — 55mm front strut |
| Volkswagen | Golf R Mk8 | Mk8 | AWD Hatch only — 55mm front strut |
| Audi | A3 Quattro | 8V / 8Y | AWD Quattro — 55mm front strut |
| Audi | S3 Quattro | 8V / 8Y | AWD Quattro — 55mm front strut |
| Audi | RS3 Quattro | 8V / 8Y | AWD Quattro — 55mm front strut |
| Audi | TT Quattro | 8S | AWD Quattro — 55mm front strut |
| Audi | TTS Quattro | 8S | AWD Quattro — 55mm front strut |
| Audi | TTRS Quattro | 8S | AWD Quattro — 55mm front strut |
| Škoda | Octavia AWD | NE | AWD — 55mm front strut |
If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.
Installation
We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.
Note
Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.