Metric Step Drill Bit : HSS Titanium Coated 3mm – 13mm
Tax included.
Pickup available at iilumolab
Please enquire for pick-up availabilities.
Metric Step Drill Bit : HSS Titanium Coated 3mm – 13mm
iilumolab
22 Atlantic Drive
Keysborough VIC 3173
Australia
Click HERE to make a booking
Metric Step Drill Bit : HSS Titanium Coated 3mm – 13mm
These HSS Titanium Coated 3mm – 13mm Step Drill Bits are easy to use 1/4 inch hexagonal shank for cutting into wood or metal thin plate or hollow section.
FREE POSTAGE when purchased with any other splitter, diffuser or splitter accessory!
Each tool produces a clean chamfered hole in the material. Can be used on plate, bar, tube, or box section. Cutting fluid or drill lubricant is recommended (the type of fluid depends on the material being machined).
As with all machining, it is best to go slow, keep the tool cool, and use LOTS of lubricant.
Application
We recommend that your intended drilling surface is clean and dry before centre punching the material to prevent ‘wandering’. Ensure to apply sufficient lubricant.
Failure to use lubricant and/or drilling fast may reduce the life of the Bit resulting in a dull or burnt tip. Injecting cold water, oil, or simple drill lubricant while working, can effectively extend the service life of the drill bit.
This bit is best suited for mild steel and softer alloys – they are not the best with 316 Stainless Steel.
Specification
11 Steps sizes : 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
Measurement : Metric
Coating : Titanium.
Material : HSS4241
Shank : 1/4″ (6.35mm) hex shank
Length : ~64mm