Radium Engineering Fuel Filter Kit with Stainless Filter for Mitsubishi Lancer Evolution 1-6

Radium Fuel Filter Kit with Stainless Filter, Mitsubishi Lancer Evolution 1-6

Application: Mitsubishi Lancer Evolution I-VI
Part Type: Fuel filter kit (stainless steel element)
Part Number: 20-1329-03

The Radium 20-1329-03 fuel filter kit replaces the OEM fuel filter mounted in the LH side of the engine bay of the Mitsubishi Lancer Evolution I to VI. No cutting or drilling is required.

Because the Radium filter is less restrictive than the OEM Mitsubishi filter, there is less stress on the fuel pump. Lower pre-filter pressure means less current draw and lower fuel temperature, and permits an increase in fuel flow. The filter tolerates alternative fuels such as methanol, ethanol and E85.

Key Features

• Direct Replacement: Replaces the OEM filter in the LH engine bay with no cutting or drilling
• Less Restriction: Lower pre-filter pressure reduces pump load, current draw and fuel temperature
• Billet Construction: Billet aluminium filter, two-piece clamp and adapter fittings
• Filter Element: Stainless steel element
• Fuel Compatibility: Suits methanol, ethanol and E85

What's Included

• Billet aluminium fuel filter (stainless steel element)
• Billet aluminium two-piece clamp
• Billet aluminium adapter fittings (10AN ORB to M14x1.5mm inverted flare inlet, 10AN ORB to M12x1.25mm outlet)
• Aluminium mounting bracket
• Stainless steel hardware

Optional Parts

• Radium Fuel Filter Kit with Microglass Filter, Mitsubishi Lancer Evolution 1-6 (20-1329-05) – same kit with the microglass element
• Radium Fuel Filter Mount, Mitsubishi Lancer Evolution 1-6 (20-1339) – mount only, if you already have a Radium filter

Important Notes

• The OEM banjo bolt and crush washers are reused – torque the banjo bolt to 25Nm (18lb-ft)
• Radium gives no model years or RHD/LHD notes; the filter mounts in the LH side of the engine bay
• Installation instructions are available in the Instructions tab

Vehicle Fitment

• Mitsubishi Lancer Evolution I, II, III, IV, V and VI

If you're unsure whether this will fit your vehicle, contact our team of experts via email at hello@iilumolab.com and send through a few photos of the car for us to verify fitment.

Installation

We always recommend professional fitment for guaranteed satisfaction. If you're wanting a hassle-free installation, feel free to contact our friendly team as we offer installation services in-store at our Melbourne workshop. For more details, contact us here.

Note

Upon receiving the item, please ensure that the part is indeed the correct item you have ordered. This can be achieved by checking labels on the packaging. Please also ensure a proper test fit of the item is conducted prior to paint and/or installation. Returns/Warranty claims will be voided if the item has been tampered with, or is no longer in resalable/new condition.